features nec's c to ku band super low noise and high-gain amplifier n-channel hj-fet ne3503m04 applications ? dbs lnb gain-stage, mix-stage ? low noise ampli?er for microwave communication system california eastern laboratories ordering information remark to order evaluation samples, contact your nearby sales of?ce. part number for sample order: ne 3503m04-a caution observe precautions when handling because these devices are sensitive to electrostatic discharge. ? super low noise figure and high associated gain : nf = 0.55 db typ., g a = 11.5 db typ. @ v ds = 2 v, i d = 10 ma, f = 12 ghz ? flat-lead 4-pin thin-type super minimold (m04) package : ? gate width: w g = 160 m m04 package part number quantity package marking supplying form ne3503m04-a 50 pcs (non reel) 4-pin thin-type super minimold (pb-free) v75 ? 8 mm wide embossed taping NE3503M04-T2-A 3 kpcs/reel ? pin 1 (source), pin 2 (drain) face the perforation side of the tape absolute maximum ratings (t a = +25c) parameter symbol ratings unit drain to source voltage v ds 4.0 v gate to source voltage v gs ? 3.0 v drain current i d i dss ma gate current i g 80 a total power dissipation p tot 125 mw channel temperature t ch +125 c storage temperature t stg ? 65 to +125 c
ne3503m04 recommended operating conditions (t a = +25c) parameter symbol min. typ. max. unit drain to source voltage v ds ? 2 3 v drain current i d ? 10 15 ma input power p in ? ? 0 dbm electrical characteristics (t a = +25c, unless otherwise speci?ed) parameter symbol test conditions min. typ. max. unit gate to source leak current i gso v gs = ? 3.0 v ? 0.5 10 a saturated drain current i dss v ds = 2 v, v gs = 0 v 15 40 70 ma gate to source cutoff voltage v gs (off) v ds = 2 v, i d = 100 a ? 0.2 ? 0.7 ? 2.0 v transconductance g m v ds = 2 v, i d = 10 ma 40 55 ? ms noise figure nf v ds = 2 v, i d = 10 ma, f = 12 ghz ? 0.55 0.75 db associated gain g a 10.5 11.5 ? db
ne3503m04 upg2227t5f typical characteristics (t a = +25c, unless otherwise speci?ed) to tal power dissipation p to t (mw) ambient t emperature t a (oc) vs. ambient tempera ture total power dissipat io n 250 200 150 125 100 50 0 50 100 125 150 200 250 80 60 40 20 0 -2.0 -1.0 0 drain current i d (ma) gate to source v oltage v gs (v) drain current vs. ga te to source vol t age v ds = 2 v 1.6 1.0 1.2 1.4 0.8 0.6 0.2 0.4 0.0 16 10 12 14 8 6 2 4 0 10 15 0 5 20 25 30 drain current i d (ma) minimum noise figure nf mi n (db) associated gain g a (db) associa ted gain vs. drain current minimum noise figure, f = 12 ghz v ds = 2 v nf mi n g a 2.0 1.2 1.4 1.6 1.8 0.6 0.8 1.0 0.2 0.4 0.0 25 15 10 5 20 0 6 8 2 4 10 0 12 14 16 18 2 0 frequency f (ghz) minimum noise figure nf mi n (db) associated gain g a (db) associa ted gain vs. frequency minimum noise figure, v ds = 2 v i d = 10 ma nf mi n g a drain current i d (ma) drain to source v oltage v ds (v) drain to source vol ta ge drain current vs. 100 20 40 60 80 0 1.0 2.0 v gs = 0 v - 0.2 v - 0.4 v - 0.6 v
package dimensions flat-lead 4-pin thin-type super minimold (m04) (unit:mm) ne3503m04 pin connections 1. source 2. drain 3. source 4. gate 0.590.05 0.1 1 +0.1 -0.0 5 (bottom v iew) 4 3 1 2 1.25 2.00.1 1.30 (1.05) 0.60 0.65 0.65 0.65 1.30 1.25 2.00.1 1 2 4 3 1.250.1 2.050.1 0.30 +0.1 -0.0 5 0.40 +0.1 -0.0 5 0.30 +0.1 -0.0 5 0.30 +0.1 -0.0 5 v75
mounting pad dimensions flat-lead 4-pin thin-type super minimold (m04) package (unit:mm) ne3503m04 0.8 0.74 1 3 2 4 1. 0 1. 0 0. 9 1. 0 0.3 th reference 1 reference 2 2 1 3 4 0.6 1.6 1.25 1.3 0.6 0.5
ne3503m04 recommended soldering conditions this product should be soldered and mounted under the following recommended conditions. for soldering methods and conditions other than those recommended below, contact your nearby sales of?ce. caution do not use different soldering methods together (except for partial heating). soldering method soldering conditions condition symbol infrared re?ow peak temperature (package surface temperature) : 260 c or below time at peak temperature : 10 seconds or less time at temperature of 220 c or higher : 60 seconds or less preheating time at 120 to 180 c : 120 30 seconds maximum number of re?ow processes : 3 times maximum chlorine content of rosin ?ux (% mass) : 0.2%(wt.) or below ir260 partial heating peak temperature (pin temperature) : 350 c or below soldering time (per side of device) : 3 seconds or less maximum chlorine content of rosin ?ux (% mass) : 0.2%(wt.) or below hs350 life support applications these nec products are not intended for use in life support devices, appliances, or systems where the malfunction of these prod ucts can reasonably be expected to result in personal injury . the customers of cel using or selling these products for use in such applications do so at their own risk and agree to fully indemnify cel for all damages resulting from such improper use or sale. a business partner of nec compound semiconductor devices, ltd. 03/04/2005
4590 patrick henry drive santa clara, ca 95054-1817 telephone: (408 ) 9 19-250 0 facsimile : ( 40 8 ) 988-0279 subject: compliance with eu directives cel certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of european union (eu) directive 2002/95/ec restriction on use of hazardous substance s i n electrical and electronic equipment (rohs) and the requirements of eu directive 2003/11/ec restriction on penta and octa bde. cel pb-free products have the same base part number with a suffix added. the suffix Ca indicates that the device is pb-free. the Caz suffix is used to designate devices containing pb which are exempted from the requirement of rohs directive (*). in all cases the devices have pb-free terminals. all devices with these suffixes meet the requirements of the rohs directive. this status is based on cels understanding of the eu directives and knowledge of the materials that go into its products as of the date of disclosure of this information . restricted substanc e per rohs concentration limit per rohs (values are not yet fixed) concentration contained in cel devices -a -a z lead (p b) < 1000 ppm not detected (*) mercury < 1000 ppm not detected cadmiu m < 100 ppm not detected hexavalent chromiu m < 1000 ppm not detected pbb < 1000 ppm not detected pbde < 1000 ppm not detected if you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. important information and disclaimer: informatio n p rovided by ce l o n its website or in other communications concertin g the substan ce content of its products represents knowledge and belief as of the date that it is provided. cel bases its know ledge and belief on informatio n provided by thir d p arties and makes no representation or warrant y as to the accura cy of such information. efforts are underw ay to better integrate information from third parties. cel has taken and continues to take reasonable steps to provide representative and ac curate information but ma y not have conducted destructive testing or chemical analysis on incoming ma terials and chemicals. cel and ce l suppliers consider certain information to be propri etar y, and thus cas numbers and other limited information may not be availabl e for release . in no event shall cels liability arising out of such information exceed the total purchase price of the cel part(s) at issue s old by cel to customer on an annual basis. see cel terms and conditions for additional clarification of wa rranties and liabilit y.
|
